Panthers59

I use a 50 yd zero on all my AR’s 15’s and 10’ I just believe it the most practical zero. An AR15 with a 2.8” over bore scope zeroed at...

Shot that target at around 450 yards off shooting sticks

what velo is it running with said powder/bullet, Doc?

Defiance Anti-X 24' Benchmark Carbon 9 twist barrel Ti Pro Brake Hawkins Hunter DBM w/ 2 mags Nimrod Stock LPR single slot rail, ARCA...

First issue I see is "factory ammo". Second, get another trigger, or IF you're comfortable with it, a set of Wolff Springs and minor...

The OP didn't mention the stock type on his Mark Ii Ruger but I did review a couple during the mid 90's. The first was a .338 which...

Reloading might help.

I have a Ruger Mark 11 in 338 WM. It's been a tack driver, and has been my go to rifle for larger game animuals. I did have a trigger...

I can tell you how to accurise your Ruger. For it to work, you must do it exactly like this. I did this full time turning many Rugers...

I had one in 280 Remington and was a 1.25" rifle. My gunsmith did some trigger work and then I put it into a hogue overmolded stock and...

Mine in 22-250 made me work hard for .75 moa….bedding, rebedding and load development…while SAKO and Remington guns easily achieved .5...

While an after-market trigger and bedding are excellent modifications, they might not be enough if you rely on factory ammunition. I...

I agree with others handloads could help. One simple fix is to be sure the front action screw is not bottoming out in the blind hole...

You could do an AR10 pistol in 308....if the bullet doesnt kill it then thr muzzle blast should set it on fire 🤣. In all seriousness a...

Do not worry about other people's thoughts; ask yourself if it is enough to save your life.