Palix-Dog

If it were me I would just switch barrels. Take it to a competent gun smith, have them true everything up on the action and bed in the...

Before you spend $$ on a new body die run your die down in the press 1/16 of a turn size a piece of brass and see if it chambers. Keep...

I milled .015 off my shell holder and it cured all my wsm problems.

I have Cortina die and I’ve reduced a shell holder 0.020” to address some 1x fired (in over size chamber) Norma brass I bought a couple...

Renting a reamer and correcting the headspace by hand reaming seems like an inexpensive and better way to address this.

Has anyone had problems with clickers using ADG or Peterson brass?

7mm prc .060 off of jam.

My contributions with the standard disclaimer - these are my loads and are safe in my rifles ONLY : 300 Win Mag (Ruger M77MKII) 175gr...

A couple favorite 280ai loads 150 gn Barnes TTSX, 61.5gns RL 22, LR primer, 3116 fps, ES of 4. 160 Accubond, 56 gns RL 17, LR...