Recent content by Moki

I've now had a bit of an experience I also shoot a 22" factory tapered/fluted Rem 700 LTR in 6.8SPC my preferred bullet are 95gr Barnes TTSX @ 2900fps I had an opportunity to purchase 500 110gr Accubonds I am loading them @ 2750fps. This last Sunday morning I came across a spike blacktail buck...

Hope these tables work here are some Quickload data for the 12.5" barrel in 308 Win Cartridge : .308 Win. (SAAMI) Bullet : .308, 125, Nosler Accubond 52165 Useable Case Capaci: 49.073 grain H2O = 3.186 cm³ Cartridge O.A.L. L6: 2.700 inch = 68.58 mm Barrel Length : 12.5...

I'm in Canada here we cannot hunt with handguns but if a short rifle ie a CP with a butt stock has a barrel manufactured shorter than 18" and the overall length is greater than 26" it is legal here. I'd like to introduce to you my Canada legal 12.5" barreled Rem 700 PCR short rifle in 308 Win...

This is my do everything motorcycle/SUV carbine over the last couple of years yes this is a legal in Canada configuration 14" SSK Ind barreled T/C Contender carbine in 338JDJ #2 loads are 180gr Accubonds @ 2500fps or 220gr SST's @ 2350fps I've shot 2 deer with it since I put it together in...

I really like the 375 cal have dreamed about a 375WSM for years even played with a few 300 WSM cases inserting 375 cal bullets into them when the 300WSM was first introduced. I feel it would be optimum for North American game/hunting especially in an AR platform. I currently shoot 14" and 21"...

Holy thread revival... :) I haven't changed anything other than I only use the XS Sights rear ghost ring or the VX3 4.5-14x40mm B&C reticle scope now and I am a lot older yes I still shoot it need to make up some more loads not new was loading these as well at the time of this thread I load...

This might not be in the spirit of the OP's question but I'm into single shots with interchangeable barrels so two of my choices will be a stainless T/C Contender frame I have 18 barrels from 22LR - 45-70 - 50 cal muzzle loader for it, next would be a stainless T/C Prohunter frame I have 4...

My rifles chambered in cartridges that reach out like 25-06, 270 Wby, 300 magnums, 375RUM get Leupold VX2 4-12x40mm or VX3 4.5-14x40mm scopes. Shorter distance rifles get Leupold 1-4x, 1.5-5x and 2-7x scopes.

Several years ago I bought two boxes of 100 210gr 30 cal ABLR to load in my 300RUM but due to the super accuracy of my 200gr Accubonds @ 3200fps loads I never did load them. A couple months ago I was reloading for my 22" barreled T/C Prohunter in 30-06 I load 165gr Accubonds @ 2880fps looked...

I'm 60 this month = I don't have an issue with seeing thru scopes yet my issue is when shooting iron/ghost ring sights my eyes just won't focus clearly on them anymore.

and with everything that everyone has said so far = I'd pass on both I wouldn't consider either for out west hunting especially out to beyond 500 yards.

This one is a shortened to 19" barrel in 6.8SPC loaded with 95gr TTSX @ 2900fps. For deer - black bear etc hunting I also have set ups in 21" barrel in 7-30 Waters 21" barrel in 308Bellm 21" barrel in 35 Rem 21" barrel in 375JDJ 22" barrel in 45-70 For predators I have them in 19" barrel...

These are my truck guns = legal configuration in Canada. 14" barreled T/C Contender carbines in 338JDJ #2 & 375JDJ AOL is 27.5" 338JDJ #2 = 180gr Accubonds @ 2500fps zeroed 1 3/4" high ! 100 yards is 1 1/2" low at 200 yards tip of the bottom reticle post is dead on @ 320 yards scope is a...

I'm into single shot T/C Contender carbines and Prohunter rifles so would have to have one frame of each model with multiple barrels the 3rd would be my 21" barreled Rem 700 LSS in 375RUM

Stock factory hinged floor plate.