John Justice

Yep I'll second that. If you need to know in the future check the SAAMI cartridge spec and use the shoulder datum line circumference to...

You need the .375 comparator

I'm using Hammers in all kinds of cartridges and for many different applications. We took 11 animals in South Africa back in June. None...

If you search the forum for Hammer Hunter Deer you will get many success threads, they work really well. I recently made a handload and...

A little different here as we're privileged to get to serve others at Thanksgiving. Photos are from last year. Looking to provide meals...

I have a lightweight leather rear bag that works well. Fill is Git-Lite

Absolutely it will most likely change the POI because it completely changes the harmonics of the barrel, in addition a suppressor can...

I’ve loaded a pile of nickel plated brass with no issues. I’ve annealed in in my amp annealer as well.

I guess I've been lucky.......I actually use a fair amount of nickel plated brass, especially for wildcats which i have and shoot the...

Is this a factory rifle? If so, those signs may be a result of poor maching of the bolt face (burrs on ejector hole, firing pin hole...

If it's a hunting load and accurate, load up a bunch and store them away. If it's for target I'd back it off some.

Kill them all.

Try: 50 in/lb on front screw 25 in/lb on rear screw 5 (yes, 5) in/lb on middle screw You are bending your action at the rear tang with...

One will work for both, but they make flow through suppressors for gas guns that don't have as much gas coming out of the ejection port...

Just playing around today. First two were bore sighters…not shown. ELDX 162 COAL: 2.850 RL26 SCR 18" Plan to explore the 62.5-63.5 range...