-
If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here
J
jjohnsonElknewbie
- Messages
- 10
- Reaction score
- 5
Latest activity Postings About Post areas
-
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with
Like.
Went do a 500 yard cold bore (no zero check) shoot with this newer 284 Win load of 168 ABLR Tuesday with wind blowing 12-15 mph @ 8:00... -
JjjohnsonElknewbie reacted to med358-boise's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
COAL is 3.05 at 60/1000 of the lands.
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Nice! Now we're talking and thank you
-
JjjohnsonElknewbie reacted to 98s1lightning's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
Ok I misunderstood the post I never annealed any brass either
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
I don't anneal at all...should with the amount of shooting I do, but I don't take the time. Maybe when I retire and have more time! 🤷♂️...
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
Depending on pressure…When I run some of my hotter hunting loads I'll have to trim a bit after 2-3 loadings on Win brass. Milder loads...
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Speaking of brass, how often do you guys have to trim your .284 cases?
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Great minds think alike! I already swapped my bolt stop and moved to the L mags in my 7-08 and would do the same in the .284. What's...
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
Yes Sir!! 52-53 grains is the sweet spot for H4350 and 150 class bullets!
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
A very good F class shooter/rifle smith once told me... who cares about 50-75 fps less velo if you can dial 2 or 3 clicks more and hit...
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Roger that and it's a ubiquitous powder that can be used for many different cartridges with good results.
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Agree! I requested .284 load data from Berger the other day for the 140, 168, and 180 hunting VLDs. I will share post-receipt.
-
JjjohnsonElknewbie reacted to Roughrice's post in the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler with Like.
I have not tried SB6.5. I have read that it can be really good but can get pressure spike close to top end. I have worked up another...
-
JjjohnsonElknewbie replied to the thread .284 Winchester, newer loads for 150 gr Eld x or M, 160 gr Nosler.Wanted to update on my daughter's cow hunt from a couple weeks ago. Final load we landed on for her 18" suppressed Tikka T3x 7-08 was...
-
-
Loading…
-
Loading…
-
Loading…