Recent content by fastfire57

I have a NF 2OMOA base on my 110FCP and a NXS 5.5X22 NPR-1 I get 1/2 MOA or less with Berger 300gr OTM.

I have a box of new Lapua brass, I have full length sized and want once fired to my chamber. Does someone have a load they used with a fast burning pistol powder, cream of wheat and TP? 0r what is your method? After fire forming I will neck size for the next 2-3 loadings then full length size again.

The only load I could find for RL33 was 97.5gr and a 300GR SMK I am using Berger 300gr OTM and am looking for a starting load. Currently using using 88gr H1000 I have been seating .010 off the lands. Any help?

So, I'm guessing that I'll get better results than H1000 in my 338 Lapua? What about temperature differences, this is not an extreme powder. I just recently snagged a 8lb jug of RL33 but haven't got to play with it yet.

What are the differences of RL33 compared to H1000? I don't se RL33 in the burn rate charts. I'm using a Savage 110 338 Lapua.

I changed what I am going to build so here is the barrel I ordered. Krieger 6.5 cal SS 1.8.5tw #17 HV @29" 1.250 X .900 325.00 SHIPPED PM or call me @208-365-3470 Dave

sold pending funds

sold

How long are the primer pockets lasting?

Straight taper from 5" from the chamber end. not fluted

I have changed my mind on my next build so here's my new .338 Kreiger barrel 1-9.35tw MTU @33" 1.450 X 1.000 $497.00 $20.00 Shipping in the lower 48

Can you find out the loads they are using?

A friend has Shooter on his Ipad touch. I am ignorant with electronic devices, where can I buy the cheapest Ipads.

He said he has 200fps more than 338 Lapua and using Lapua brass. Primer pockets were getting loose.

I shot a long range match today 1760, 2000 and 2200yds. One of the shooters was using the 338AI, he said it was hard on the brass (shorter life). What are anyone's experiences with this cartridge? Rob, please call Dave. Thanks