• If you are being asked to change your password, and unsure how to do it, follow these instructions. Click here

Savage 110,338 Lapua and RL33

fastfire57

Well-Known Member
Joined
Feb 7, 2012
Messages
51
The only load I could find for RL33 was 97.5gr and a 300GR SMK
I am using Berger 300gr OTM and am looking for a starting load.
Currently using using 88gr H1000 I have been seating .010 off the lands.
Any help?
 
Last edited:
The only load I could find for RL33 was 97.5gr and a 300GR SMK
I am using Berger 300gr OTM and am looking for a starting load.
Using 88gr H1000 I have been seating .010 off the lands.
Any help?

My load uses H1000, but 88 should be a good start. I'm not sure how far off the lands I am, but my OAL is 3.0085 at the ogive with the OTM bullet. Primer is CCI 250.

My rifle is custom built on a Weatherby Mark V action, so take all this with a grain of salt. Start low and work up.

I don't have advice for RL33, but I hear people are seeing good velocity with it.

--md
 
Warning! This thread is more than 11 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top