Recent content by Brambles

I have a stainless A7 in 270 wsm with a vx3 3.5-10x40..Boone and Crockett reticle set up to 600 yards and is a very accurate and consistant rifle. I shoot a 130gr ttsx @ 3250 fps...

My 280ai 140tsx load prefers those primers too.

you running standard or magnum primers?

Custom Remington ti 280ai with 9 twist barrel refuses to shoot Retumbo under 1 MOA. I've tried 162 eld-x and 168 Berger hvld and tried working the crap outta Retumbo with charge weights and seating depths, primers but nothing consistantly under 1moa....kinda frustrating because the...

Another south eastern BC guy here....... ..just live north of you by 34 minutes..

Well I just ran the math on the correction factors .97, your guys .995 and 1.0 It certainly makes the most sense that I mucked up the correction factor test...something musta been screwy with my setup because the math ends up making my hits extremely close in elevation. At 650 there...

I suppose I'll have to take my tape measure out with me next time and manually pace the target.

Night force nxs 5.5-22x56 npr1 zero stop.

I was shooting north. I managed to find a couple posts on this forum, searching through Google and linking back here....one fella claimed he had 1.5 MOA drop from a downdraft on a 1300-1400 yard shot, I can't remember exact distance. He went back later in a calm condition and his standard...

So I'm in the final stages of collecting data and setting up my shooter app. 338 edge shooting 300 OTM tac at 2716 fps Went shooting this evening. Shot 500, 650 and 931 yards Shooting across the slope I was on, downdraft coming down the slope 500 was approx 1" high dialed 8.75 MOA 650 was...

I was shooting at 690 and 942 the other day with disappointing results, pretty much my fault for not compensating for spin drift. After I dialed the drift I hit the 690 consistently...but the 942 was a bit more challenging....something wasn't jiving with my solution... it seemed like I was...

So I just got off the phone with Ron Smith, wow...81 years old, still working and remembered my Mom and Dad from shooting with Dad at matches 20 years ago... He definitely stamps the chamber end and recommends cutting a couple inches off the muzzle end anyways to get final barrel length, he...

Not sure if Ron is still working or not, but I will try and track him down. This barrel was mfg probably 10-12 years ago. Thanks for the reply

I know this is an old thread, but in the off chance the OP is still lurking.....did opening up the brake help? I have a holland QD brake on my 338 Edge shooting 300gr, rifle is light at 11-11.5 lbs...recoil is fairly stiff but not bad, however I can't spot my shots. Thx

So my grandfather (machinist) was in the process of building his own falling block rifle when he moved and downsized. He dropped this thing off at my house. The action isn't 100% finished and I certainly don't have the skills. But the barrel has potential, it's an uncontoured Ron Smith 8...