Recent content by bigerik

  1. B

    Your Next Rifle Will Be In Which Cartridge

    either the 338 edge or 338 o'brian.:)
  2. B

    3" group 200 yards, GAP .300 WSM, Berger VLD not cutting it? Need advice pls

    i thinks its because the "factory ammo" is seated to work in all types of rifles! and fit the magazines as well. these bullets rock! but you have to set them out close to the lands. i set mine .010 off the lands. they are long bullets and when seated this way wont work in my mag well, but they...
  3. B

    Berger Bullets needs your advice - please help

    i would like to see them sold in boxes of 250 like the amax or even boxes of 500 like the matchking. the vld hunting bullets are the most accurate bullet ive ever shot through my rem 700 in 30-06. .442" @ 200 yards with rem brass even!:D
  4. B

    300 Mag and 210 bergers

    ive been using 91.5 gr of reloader 25 with either the 208gr Amax or the 210 vld bergers in my m700 in 300 ultra mag and im getting .5 moa and approx 3020 fps mv, E @ 1000yds = 1400lbs, drift=54",drop=235"@1000yds vel @1000yds=1750fps used handloads.com for data ive also used 98gr of RL25...
  5. B

    168 gr Berger results **Graphic photos**

    Rich, it sure was. the load i use now is 58.2gr of H4350 @ approx 2757 fps for my short barrel. i was most likley thinking of imr 4064 witch was loads in the 40's, 46-48grs before i settled into the H 4350 gave me abit better accuracy. my very first reloads were AA 2520 @ 42.8 gr @2259...
  6. B

    168 gr Berger results **Graphic photos**

    great pics and results, i use the 168gr vld bergers in my rem 700 in 30-06 and really love how they preform in it. its not a custom rifle with high end barrel and trigger,but just a plain old off the shelf ADL with 20" barrel, 25moa rail and 4-16x40mm ill mildot scope,i floated the barrel and...
  7. B

    rem 700 .338rum to edge

    Hammertyme, sounds like good advice. ill buy the .338 rum and enjoy it for what it is ,and if and when i shoot the barrel out get the new one chambered in the edge or the .338 improved w/40 deg shoulder said to hold 4-6% more powder than parent case. thanks erik
  8. B

    rem 700 .338rum to edge

    hi, im looking into building a 338 edge. i was wondering if one could use the 338rum rifle and just cut the chamber to edge dementions. saving buying a new barrel ect to get started? any info would be great. thanks erikgun)
  9. B

    hello from south/east indiana

    hi my name is erik ive 14 years of military service 11 of those are infantry. ive fired/qualified with many weapons over those years from the 9mm,45pistols,m16,m203,m4 carbine, rifles,mp5,uzi smg,m60,m240,m249,.50bmg machine gun,40mm mk19,and the m21 and m24 and m107/L82sniper rifle systems...
Top