SOLD/EXPIRED Rem 700 S/A ADL composite take off

[renegadelzard]

comes with mag box, follower, and trigger guard...i'd like to get 50 out of it, but will take 250 or so once fired 308 brass, 200 or so 80-100gr 243 bullets, .357 diameter bullets (lead or plated), or anything else interesting for reloading 308, 30-06, 243, 454Casull, 5.56, 30-30, or 38 special....i open to just about anything..

 

[hunter4764]

I have about 100 rounds of .357 158gr. JHP Hornaday bullets and about 100 rds. of 38 brass. I have a few 243 bullets to go with the rest that I would trade you for the stock and bottom metal. Thank you Jerry

 

[renegadelzard]

I have about 100 rounds of .357 158gr. JHP Hornaday bullets and about 100 rds. of 38 brass. I have a few 243 bullets to go with the rest that I would trade you for the stock and bottom metal. Thank you Jerry

Hey Jerry, how many is a few 243 bullets and what weight...im primarily looking for 80 to 100 grains...

 

[hammerstone]

SIR I HAVE 200 OR SO 6MM 105 GR SPEER BULLETS 100 HORNADY 87 GR BTHP..300 38 SPECIAL BRASS 280 RCBS DIES 270 RCBS DIES 222 DIES 220 SWIFT DIES 375 DIES 357 CARBIDE DIES LIKE NEW.........THIS IS SOME OF MY STUFF TO [email protected]

 

[renegadelzard]

SIR I HAVE 200 OR SO 6MM 105 GR SPEER BULLETS 100 HORNADY 87 GR BTHP..300 38 SPECIAL BRASS 280 RCBS DIES 270 RCBS DIES 222 DIES 220 SWIFT DIES 375 DIES 357 CARBIDE DIES LIKE NEW.........THIS IS SOME OF MY STUFF TO [email protected]

just sent you an email

don

 

[renegadelzard]

still available

 

[royinidaho]

To promote this stock a bit....... 50 bucks is a good price and

I replaced the wood pillar/skim bedded stock on my 338 RUM with one of these stocks to see if 1) they were any good and 2) for a little weight reduction.

Results: With nothing more than mounting it to the barreled action, she shoots lights out and has provin' coyote accuate (on rocks) to 1177 yds and am able to spot shots from 100 yds on out.

The rifle shot very well to begin with. The tupperware stock didn't affect consistency one iota.

I've never looked back.

 

[renegadelzard]

cant figure out how to edit this post, so im going to do it the long way...same stock and metal as above, but now im looking for either reloading components, mainly 308 or 243, or a free float tube, mid or rifle length for my AR...barrel nut not needed...just the tube....also interested in any glass you guys have laying around...doesnt have to be the highest quality, but shootable glass...