What Happened To This Bullet ?

Could have been in an ar chassis.. hit feed ramp/barrel extension lug and jammed, distorted and did not feed correctly, then a forward assist was "whacked" to try to feed/chamber to no avail
 
Looks like someone forgot to switch from their sizing die to the seating die and jammed the bullet up in between the decaping rod/expander ball and the inside of the die when they went to seat the bullet.
^^^^This has my vote.
 
I'm with Barrelnut. It appears there are brass striating on the bullet. Someone short cycled and tried to force a 2 nd round into another round. I would think that it took considerable force to cause that to the bullet. If you have to force a round into the chamber then you should STOP and take a look to see why.
 
Warning! This thread is more than 6 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top