Stiller/Bartlein in .284 win.

Discussion in 'Gun Photos' started by Hunter2678, Mar 10, 2014.

  1. Hunter2678

    Hunter2678 Well-Known Member

    Messages:
    601
    Joined:
    May 2, 2012
    Just got the barreled action back from Kelbly's last wed. I had Greg Walley chamber it for me in 284 win. .317 nk, .220 FB. 1.5 deg. lead. Gun shot great during break in with simple fouler loads. 1st 3 fouler/sighter shots all touched low right. After adjusting the scope The remaining 21 foulers chewed out a nice hole on the target with the exception of 2 shots that were the 1st on a clean bore after cleaning. The action is a devcon bedded Stiller Predator V single shot, short action mated to a 31' bartlein 9tw , muscle brake, jewel trigger and Sightron SIII.
     

    Attached Files:

    Last edited: Mar 10, 2014
  2. Canadian Bushman

    Canadian Bushman Well-Known Member

    Messages:
    1,650
    Joined:
    Jan 24, 2012
    Oooh that is nice. Ive long admired the 284 win.

    What bullet did you decide to use?
     

  3. Hunter2678

    Hunter2678 Well-Known Member

    Messages:
    601
    Joined:
    May 2, 2012
    Berger 180s and JLK 180s
     
  4. Canadian Bushman

    Canadian Bushman Well-Known Member

    Messages:
    1,650
    Joined:
    Jan 24, 2012
    Thats what i was thinking because of your free bore.

    Do you regret building it on a short action, i imagine you pull the bolt to extract a loaded round?
     
  5. Hunter2678

    Hunter2678 Well-Known Member

    Messages:
    601
    Joined:
    May 2, 2012
    Not at all, the oversized port of the Stillers allows plenty of room to load a round and also plenty of length to extract a loaded round. You can see the small radius cut on the leading edge of the port that allows this.
     
    Last edited: Mar 11, 2014
  6. Canadian Bushman

    Canadian Bushman Well-Known Member

    Messages:
    1,650
    Joined:
    Jan 24, 2012
    Oh cool i didnt realize their port was that large. Thats a nice setup, you did a fine job of planning it out.

    What are you able to spit those 180's out at?
     
  7. Hunter2678

    Hunter2678 Well-Known Member

    Messages:
    601
    Joined:
    May 2, 2012
    Thanks...well I've got quite a bit of 4831sc and just went out and bought 3 jugs of RL17. Will be testing the RL17 this weekend and hopefully get 2950-3000fps in an accuracy node using my lapua brass and cci primers.
     
  8. Canadian Bushman

    Canadian Bushman Well-Known Member

    Messages:
    1,650
    Joined:
    Jan 24, 2012
    Thats just evil!
    Nice rig, and i hope your load development goes the way you want.



    Happy hunting