Scope mounting on Defiance anti

Mark 4's
 

Attachments

  • EFC6F928-B978-494E-A800-E2857D646275.jpeg
    EFC6F928-B978-494E-A800-E2857D646275.jpeg
    1.5 MB · Views: 120
I used Hawkins Hybrids on my 6.5SS with a Mark5HD built on an anTi. I had their 34mm rings opened to 35mm by live4thehunt.

View attachment 319121
I purchased some Hawkins 34mm rings then reached out to Chris at Live4thehunt. He no longer opens up the rings to 35mm. Looks like I am going to go with a pic rail. I was really hoping to use the Hawkins.
 
On my ANTI L/A I used the Talley medium ring mounts with a 8-32 NX8. It barely cleared the ocular on the scope and was not able to mount the scope back as far as I would like. I went to the 20 MOA rail.

If you want to try the Talley Ring mounts PM me as I will sell mine.
I have a short action
Not sure the short and long are interchangeable
 
Anti short action, vortex pst, high talley one piece rings. Maybe 1/8 Clarence low will not work
 

Attachments

  • 20220104_090947.jpg
    20220104_090947.jpg
    1,022 KB · Views: 146
  • 20220104_090932.jpg
    20220104_090932.jpg
    1.1 MB · Views: 148
  • 20220104_090901.jpg
    20220104_090901.jpg
    1,012 KB · Views: 149
Anti short action, vortex pst, high talley one piece rings. Maybe 1/8 Clarence low will not work
Thanks that is what I am talking about right there
I am using the Alpine Hunter also and with the lows it is perfect for my face but hopefully the mediums will clear like Defiance said and I won't need a stock pack
 
Seekins Lows are the limit, they are 2nd lowest behind the Ken Farrell low rings. I think they are .835", you should be able to extrapolate that out and pick a set that will work.

Here is the Defiance Tenacity with the Seekins rings and Vortex Razor HD LHT 3-15x42mm, plenty of bolt handle clearance.

I wish someone would come up with a swept bolt handle to screw in the bolt handle extension for extra clearance. View attachment 319477
What stock is this?
 
Seekins Lows are the limit, they are 2nd lowest behind the Ken Farrell low rings. I think they are .835", you should be able to extrapolate that out and pick a set that will work.

Here is the Defiance Tenacity with the Seekins rings and Vortex Razor HD LHT 3-15x42mm, plenty of bolt handle clearance.

I wish someone would come up with a swept bolt handle to screw in the bolt handle extension for extra clearance. View attachment 319477
APA Tru-loc lows are 0.750". If you like them that low…
 
Top