removable brake and suppresser

Discussion in 'Rifles, Bullets, Barrels & Ballistics' started by arrow, Dec 29, 2010.

  1. arrow

    arrow Well-Known Member

    Messages:
    235
    Joined:
    Dec 13, 2007
    i am having a rem 700 built right now with a broughton 7.1 contour barrel. it is 1.200" at breach 4" cylender and .960" at muzzle. 20" long. it is going to be chambered in .308 winchester. i was looking to put a break on it somewhere along the lines of a badger thruster or a defensive edge. i read about the other break that badger makes is designed to be removable. does that mean that these two types of breaks i mentioned are not suposed to be removed and replaced? i am looking to be able to take the break off and screw on a suppressor. will this work or are there any breaks similar to these that it will work on? i just dont want a huge chunk of metal on the end of the barrel. something that looks like its somewhat part of the barrel. thanks
     
  2. diriel

    diriel Well-Known Member

    Messages:
    409
    Joined:
    Sep 22, 2010

  3. FEENIX

    FEENIX Well-Known Member

    Messages:
    9,806
    Joined:
    Dec 20, 2008
    I have a custom MB similar to that of Holland's QD on my .300WM. The smith that built it also made a cap and a tool to remove the MB should I desire to. However, I do not want to deal with any difference in POI with it on and off, just a thought for your consideration.

    Good luck!

    Ed