Mountain 68
Member
I'm new to reloading and LRH going to start reloading my 338 lapua magnum. Looking for advice on what dies you guys would suggest to buy for loading LRH loads.
If the bushing is bound up and not free floating then I would expect increased run out. But ... a free floating bushing shouldn't cause this. I own many Redding bushing dies and have never seen them cause an increase in run-out.I tried bushing dies and my runout INCREASED.
I've seen it every time, but it is not much with good brass. 0.0025" or better.If the bushing is bound up and not free floating then I would expect increased run out. But ... a free floating bushing shouldn't cause this. I own many Redding bushing dies and have never seen them cause an increase in run-out.
You ask a question with a lot of variables. Let's start with hunting. If this is for hunting then full length resizing may be best. Functionality is key if you have hundreds invested in a hunt. You don't need any chambering difficulties getting in the way. Assuming you are a proficient marksman, a good FL die set from RCBS will produce MOA capable ammo all day.I'm new to reloading and LRH going to start reloading my 338 lapua magnum. Looking for advice on what dies you guys would suggest to buy for loading LRH loads.