Remington Model 600 action, RH, blue, converted to single shot, Davidson aluminum loading ramp epoxied in magazine slot and magazine cut filled with Duro-Steel epoxy.
Has original bolt, w/ PPC bolt face, (easily & inexpensively opened to 308 face by your project build smith original extractor converted to Sako style, and Rem. 40X bolt handle added. Bolt lugs, bolt face, and action-face trued. Threads check'd OK, but have your smith verify. All work performed by Fred Sinclair.
Included is a 7" aluminum 7075 T-6 action sleeve, flat bottom, round top, drilled & tapped for scope bases and front guard screw. Sleeve profile very similar to Stolle Panda profile. Action should be able to accept a trigger hanger with a slight modification, if desired. Jewell trigger will fit as-is.
The sleeve has NOT been epoxied to the action yet, so any action work or barrel fitting will be easy. Can be used as a glue-in or pillar bedded with screws. The sleeve increases bedding area, rigidity and provides a wider more stable bridge for scope mounting.
$625 + sh & ins., to your FFL. Trades considered. Stock in last pic is not included.
Email [email protected] for prompt reply
Pics are here: Click on link.
http://img200.imageshack.us/img200/5489/rem6001.jpg
http://img827.imageshack.us/img827/8162/rem6002.jpg
http://img703.imageshack.us/img703/1902/rem6003.jpg
http://img511.imageshack.us/img511/1893/rem6004.jpg
http://img202.imageshack.us/img202/2171/rem6005.jpg
http://img148.imageshack.us/img148/2888/rem6006.jpg
http://img818.imageshack.us/img818/9770/remsleevestock4.jpg
Has original bolt, w/ PPC bolt face, (easily & inexpensively opened to 308 face by your project build smith original extractor converted to Sako style, and Rem. 40X bolt handle added. Bolt lugs, bolt face, and action-face trued. Threads check'd OK, but have your smith verify. All work performed by Fred Sinclair.
Included is a 7" aluminum 7075 T-6 action sleeve, flat bottom, round top, drilled & tapped for scope bases and front guard screw. Sleeve profile very similar to Stolle Panda profile. Action should be able to accept a trigger hanger with a slight modification, if desired. Jewell trigger will fit as-is.
The sleeve has NOT been epoxied to the action yet, so any action work or barrel fitting will be easy. Can be used as a glue-in or pillar bedded with screws. The sleeve increases bedding area, rigidity and provides a wider more stable bridge for scope mounting.
$625 + sh & ins., to your FFL. Trades considered. Stock in last pic is not included.
Email [email protected] for prompt reply
Pics are here: Click on link.
http://img200.imageshack.us/img200/5489/rem6001.jpg
http://img827.imageshack.us/img827/8162/rem6002.jpg
http://img703.imageshack.us/img703/1902/rem6003.jpg
http://img511.imageshack.us/img511/1893/rem6004.jpg
http://img202.imageshack.us/img202/2171/rem6005.jpg
http://img148.imageshack.us/img148/2888/rem6006.jpg
http://img818.imageshack.us/img818/9770/remsleevestock4.jpg
Last edited:
