NDNorm
Well-Known Member
LibertyOpticsLLC
i clicked on it to check the link, you will have to select IOR then 35mm scopes to get to the 3-18 FFP
the one on my Winchester
Norm
Last edited:
Few new rifles off the Allen Precision bench...
- Thread starter Fiftydriver
- Start date
Help Support Long Range Hunting Forum
LibertyOpticsLLC
i clicked on it to check the link, you will have to select IOR then 35mm scopes to get to the 3-18 FFP
the one on my Winchester
Norm
Fiftydriver
Official LRH Sponsor
Will hijack my own post.
So whats your opinion of your scope? Give us a full review.
So whats your opinion of your scope? Give us a full review.
Fiftydriver
Official LRH Sponsor
This is Magmans 338 Edge that I just got finished up and range tested this morning. All ready to ship.
APS Xtreme Medium Sporter
338 Edge
Trued Rem 700
Wyatts 3.820" extended mag
Holland Comp Lug
RB trigger
Sako extractor
Lilja #7, 30" Heavy flutes, 1-10 twist
DE 4 port muzzle brake
Customer supplies HS Precision stock
He did the stock paint job himself and it turned out very nice. Here is the only three shots I have fired out of the rifle:
300 gr SMK
92.0 gr Retumbo
CCI-250
3.775" OAL
I am pretty sure you will be happy with this rifle.
APS Xtreme Medium Sporter
338 Edge
Trued Rem 700
Wyatts 3.820" extended mag
Holland Comp Lug
RB trigger
Sako extractor
Lilja #7, 30" Heavy flutes, 1-10 twist
DE 4 port muzzle brake
Customer supplies HS Precision stock
He did the stock paint job himself and it turned out very nice. Here is the only three shots I have fired out of the rifle:
300 gr SMK
92.0 gr Retumbo
CCI-250
3.775" OAL
I am pretty sure you will be happy with this rifle.
MagMan
Well-Known Member
Happy is an understatement...more like enamored.
Thanks Kirby
Thanks Kirby
jimbo300
Well-Known Member
WOW!!! What a great looking rifle and what a shooter it is...
MagMan
Well-Known Member
Figured I'd show the first 3 shot group of barrel brake in.
90 grains of H1000
300 SMK @ 2742 fps
420 yards
Looks like I'll have to get some better plate.
Looks like things are heading in the right direction.
90 grains of H1000
300 SMK @ 2742 fps
420 yards
Looks like I'll have to get some better plate.
Looks like things are heading in the right direction.
ss7mm
Well-Known Member
MagMan:
It looks like you need to invest in some AR500 plate so you won't have all of those vent holes in your steel.
It looks like you need to invest in some AR500 plate so you won't have all of those vent holes in your steel.
Fiftydriver
Official LRH Sponsor
Good shooting my friend!!!
I have a feeling you will see many groups even smaller then that once the barrel settles in and you find your load.
Again, good shooting!!!
I have a feeling you will see many groups even smaller then that once the barrel settles in and you find your load.
Again, good shooting!!!
royinidaho
Well-Known Member
Magman,
I will have to say that that is the most pleasing finish on a stock that I have seen. You are to be congratulated on your efforts.
Now gird up your loins and do the barrel and action in lighter color/shade and the flutes in the darker.
Finally, seeing as how you bought the best of the best scopes and you'll be attached to it for several centuries, do the paint job on it also.
I can only imagine how good that would look.
Those 300 SMKs ask no forgiveness.
I will have to say that that is the most pleasing finish on a stock that I have seen. You are to be congratulated on your efforts.
Now gird up your loins and do the barrel and action in lighter color/shade and the flutes in the darker.
Finally, seeing as how you bought the best of the best scopes and you'll be attached to it for several centuries, do the paint job on it also.
I can only imagine how good that would look.
Those 300 SMKs ask no forgiveness.
