Can't find 6.5 remington mag brass

Very interested in this die am just curious of what else is needed besides full length sizing dies. Any help would be greatly appreciated
 
I have one made by RCBS for making 30 herrett from 30-30 cases
you just push case in cut top off with hack saw and file it's done
one operation.
I tryed making a 6.5 RM from 264 in full length die it crushed the shoulder.
 
I bought mine last year at Huntingtons Die Specialties ,then they had it in stock not sure now . 23281A is the part # i just looked on thier website for 100 pack. Love the :D 6.5 rem magnum
 
Very interested in this die am just curious of what else is needed besides full length sizing dies. Any help would be greatly appreciated
You will need to trim to case OAL from 2.500" (.264 WM, 7MM RM, .338 WM) to 2.170" (6.5 RM). You might also need to neck up in the process before sizing.
 
Last edited:
I tryed making a 6.5 RM from 264 in full length die it crushed the shoulder.
Did you compensate for the dimension differences, i.e. case OAL, base to neck, etc?

6.5 Rem Mag.png


264 Win Mag cartridge.jpg
 
Warning! This thread is more than 4 years ago old.
It's likely that no further discussion is required, in which case we recommend starting a new thread. If however you feel your response is required you can still do so.
Top