Can't find 6.5 remington mag brass

[OKIE2]

HERE IS HOW TO FIX THE PROBLEM

Redding Case Forming Die 6.5mm Remington Magnum from 264 win mag, 7mm Remington Magnum or 338 Winchester Magnum. $89.99 ea.

Case Forming Die 6.5mm Remington Mag from 7mm Remington Mag or 338 Winchester Mag.

 

[Jerry M]

Black Hills Shooter Supply had it last year. You might want to call them Home Page

Good luck

Jerry

 

[OKIE2]

Black Hills Shooter Supply had it last year. You might want to call them Home Page

Good luck

Jerry

We do not sell retail (TOO THE PUBLIC).
IS WHAT THEIR AD SAYS

 

[Jerry M]

That is correct, your local dealer will have to order it for you.

Good luck

Jerry

 

[Mikiedem]

Very interested in this die am just curious of what else is needed besides full length sizing dies. Any help would be greatly appreciated

 

[OKIE2]

I have one made by RCBS for making 30 herrett from 30-30 cases
you just push case in cut top off with hack saw and file it's done
one operation.
I tryed making a 6.5 RM from 264 in full length die it crushed the shoulder.

 

[Mikiedem]

Well thats easy enuff, thank you for the information. Will get one ordered tomorrow

 

[tobehunted]

I bought mine last year at Huntingtons Die Specialties ,then they had it in stock not sure now . 23281A is the part # i just looked on thier website for 100 pack. Love the 6.5 rem magnum

 

[OKIE2]

I bought mine last year at Huntingtons Die Specialties ,then they had it in stock not sure now . 23281A is the part # i just looked on thier website for 100 pack. Love the 6.5 rem magnum

Did they have the brass?

 

[Truc]

don't know if it helps but I have about 15 pieces I bought some time ago I'll sell if you're interested

 

[plbrpaul]

I have 20 once fired 6.5 rem mag all same lot.

 

[FEENIX]

Very interested in this die am just curious of what else is needed besides full length sizing dies. Any help would be greatly appreciated

You will need to trim to case OAL from 2.500" (.264 WM, 7MM RM, .338 WM) to 2.170" (6.5 RM). You might also need to neck up in the process before sizing.

 

[FEENIX]

I tryed making a 6.5 RM from 264 in full length die it crushed the shoulder.

Did you compensate for the dimension differences, i.e. case OAL, base to neck, etc?

 

[plbrpaul]

I have 20 once fired 6.5 rem mag all same lot.

sold