Found a very informative page, and one bit in particular was very interesting to me about the effect of fluted barrels on accuracy. Here is the bit
Source
Bartlein Barrels | PrecisionRifleBlog.com
Enjoy it.
One design change that resulted from AI's exhaustive accuracy testing and development of the PSR [Precision Sniper Rifle] is the removal of flutes from the barrels. Engineers at AI decided to isolate the barrel flutes to see what impact they had on accuracy. The engineers attached a laser to the rifle's receiver, another to the barrel, and a third to the scope. All three dots were zeroed at the same point, then they started shooting the rifle. They discovered that, no matter which fluted barrel they used, the dots would diverge as the barrel heated. The dots from the devices mounted to the scope and the receiver would stay in place, but the barrel's device would manifest a point-of-impact (POI) shift. The POI shift from the warming barrel greatly diminished when they used barrels without flutes.
Engineers determined that the flutes never heated evenly, causing the POI shift. I hope the results of this test gain wide circulation through the sniper and long-range shooting communities to help eliminate some of the ignorance that surrounds the perceived advantages of barrel flutes. Flutes are great for shaving weight, but this is the first test I've heard that provided empirical data detailing what happens when the barrel is fluted. This should be the death of the "they cool a barrel faster, so they're more accurate" argument, listed among flutes' virtues. Our goal is and should always be to mitigate the effects of heat; fluting exacerbates it.
Source
Bartlein Barrels | PrecisionRifleBlog.com
Enjoy it.