Help on 300 win loads

[Aussie Hunter Steve]

I use Fed 215 and AR2225 (equivalent RL25 or Retumbo) with 212 Eldx for 3050fps in 26" bbl. Shoots sub .5 MOA. Suggest you work up from 75gr...

 

[Jpron]

I use Fed 215 and AR2225 (equivalent RL25 or Retumbo) with 212 Eldx for 3050fps in 26" bbl. Shoots sub .5 MOA. Suggest you work up from 75gr...

Wow! That's like a small missle flying through the air, very impressive

 

[Aussie Hunter Steve]

I was amazed at first because I'd always thought this powder would be too slow. The next batch of AR2225 produced the same results and I've stuck with it ever since, couldn't be happier

 

[nimrod_gn]

I've switched over from bergers to hammers but mine liked H1000, Nosler Brass, Fed 215m primers, with the 215 bergers.

Which hammers? Sledge Hammer or Hammer Hunter? Which weight?

 

[Elkeater]

Which hammers? Sledge Hammer or Hammer Hunter? Which weight?

181 hammer hunters at 3070fps. Easiest load development ever. Had a .3-.4 MOA load in about 30 rounds.

I switched over after I had a 215hybrid blow up on a small antelope doe. It left a 4 inch entry hole behind the shoulder and I had to shoot the thing again.

 

[nimrod_gn]

Also using H1000 with the hammers?

 

[Elkeater]

Also using H1000 with the hammers?

Nosler Brass, Fed215m primer, 80gr H1000, 181 hammer hunter loaded to mag length.

 

[BeaverHunter]

I copied elkeaters load development and my gun liked 81 grains of h-1000, 181 hammer hunters, fed215 primers with Nosler Brass. Just over .5 moa at 200 yards.

 

[Timnterra]

I've had great luck with Fed 215 m h1000 77gr in several different 300 win mag rifles

 

[Danny Butler]

78 grains H 1000 with Hornady 208 ELD M. 700 yrdsTACH]

 

[Wyocoyotehunter]

That definitely gives me some stuff to chew on than you guys.