Switchback2
Well-Known Member
- Joined
- Feb 18, 2016
- Messages
- 276
I have a West Texas Ordinance Custom rifle with their Switchlug system and 2 barrels. WTO has all the specs on build and you can have them make you any short action with a .473 bolt face.
You can also buy a new bolt with .384 face if you wanted to have a 223 etc barrel spent up.
If you not familiar with the Switchlug system it allows you to swap barrels in less than 1 min with only a 30 ft lbs Torque Wrench Clayton with WTO has a couple videos showing how easy barrel swaps are, this system allows you to have 1 Stock , Stock and as many barrels as you want.
I have took the 7 SAW barrel off multiple times and it has always return to within 1 MOA of Zero.
The 7 SAW barrel (25") is a Bartlien straight flutes 8.75 Twist , it has had 348 rds fired , When I had this gun built I had to form the brass from SRP Lapua 308, which I have 100 of but since then WTO has had Alpha Munitions head stamped 7 SAW brass. I have been running the Berger 175 EOL from it at 2780 FPS with RL16
The other barrel is a 6.5x47 Lapua it is also a Bartlien 26" that has had 100 rds fired through it. It's a 8 twist both barrels are threaded 5/8x24 with blind fit thread protectors.
Here is a break down
Manners T4A with Mini Chassis
Curtis Custom Axiom Action
Both Barrels are Bartlien
Timney Calvin Elite Trigger
Atlas Bipod rail
Whidden Bushing Dies 6.5x47
100 Lapua brass once fired
Redding 7 SAW dies
100 Lapua 308 brass formed to 7 SAW
20 MOA scope rail
NightForce F1 Atacr 7-35 MOAR scope
6 screw NightForce 34mm rings
Scope bubble level
One 5 rd Accurate Mag for the SAW
One AI mag for 6.5x47
Cheap Knock Accu Tech knock off bipod will go with it.
Plano Hard case
Wheeler Torque Wrench
The brass is loaded but if you didn't want to shoot my loads I could pull the bullets.
The 6.5x47 is loaded with Berger 140 Hybrids
7 SAW has Berger 175's
I am sure I am missing something so if you have any questions
You can also buy a new bolt with .384 face if you wanted to have a 223 etc barrel spent up.
If you not familiar with the Switchlug system it allows you to swap barrels in less than 1 min with only a 30 ft lbs Torque Wrench Clayton with WTO has a couple videos showing how easy barrel swaps are, this system allows you to have 1 Stock , Stock and as many barrels as you want.
I have took the 7 SAW barrel off multiple times and it has always return to within 1 MOA of Zero.
The 7 SAW barrel (25") is a Bartlien straight flutes 8.75 Twist , it has had 348 rds fired , When I had this gun built I had to form the brass from SRP Lapua 308, which I have 100 of but since then WTO has had Alpha Munitions head stamped 7 SAW brass. I have been running the Berger 175 EOL from it at 2780 FPS with RL16
The other barrel is a 6.5x47 Lapua it is also a Bartlien 26" that has had 100 rds fired through it. It's a 8 twist both barrels are threaded 5/8x24 with blind fit thread protectors.
Here is a break down
Manners T4A with Mini Chassis
Curtis Custom Axiom Action
Both Barrels are Bartlien
Timney Calvin Elite Trigger
Atlas Bipod rail
Whidden Bushing Dies 6.5x47
100 Lapua brass once fired
Redding 7 SAW dies
100 Lapua 308 brass formed to 7 SAW
20 MOA scope rail
NightForce F1 Atacr 7-35 MOAR scope
6 screw NightForce 34mm rings
Scope bubble level
One 5 rd Accurate Mag for the SAW
One AI mag for 6.5x47
Cheap Knock Accu Tech knock off bipod will go with it.
Plano Hard case
Wheeler Torque Wrench
The brass is loaded but if you didn't want to shoot my loads I could pull the bullets.
The 6.5x47 is loaded with Berger 140 Hybrids
7 SAW has Berger 175's
I am sure I am missing something so if you have any questions
Attachments
-
0C58D629-F746-4295-8F26-1812F386A09F.jpeg58.5 KB · Views: 38
-
C0914E2C-C138-41E9-9CB0-07CCC0EC82A2.jpeg382.3 KB · Views: 38
-
6DBA3DDA-EFD5-492E-B4BE-03AA3E73CC38.jpeg429 KB · Views: 37
-
4B908528-1FD8-4DD9-ACCA-A8885585BAAE.jpeg697.5 KB · Views: 36
-
BCB6A0C4-DA05-4F84-91FA-E42EEE2F962F.jpeg1.4 MB · Views: 35
-
C74969CA-7705-4A40-943F-AF7E7D4492B4.jpeg1.2 MB · Views: 32
-
ECD40BCE-7C5D-490F-8805-2A812EBECAB3.jpeg1.2 MB · Views: 33
-
C2FC1FDD-65A6-4893-9FCD-9C988059193D.jpeg1.5 MB · Views: 41
-
C849242B-44FC-42BC-BAC2-DD31CCCA07FC.jpeg1.6 MB · Views: 41
-
DB9B8915-0031-4128-9809-17E74C70287D.jpeg142 KB · Views: 42
Last edited: