Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
WSM Casing life
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Timber338" data-source="post: 1092288" data-attributes="member: 33822"><p>I'm interested more details on this comment ... are you just trying to avoid removing too much material and ending up with a neck that is too short? </p><p></p><p>I also re-read my earlier post on thin necks, and I think I could have put more thought into what I wrote. I really was turned off by the variation I was always getting in neck wall thickness of Winchester brass. I agree that thinner necks are not a problem other than they get worked more than thicker brass, but with proper sizing it wasn't too much of an issue. I would cull out brass with thin sections less than .010" thick, and turn the rest so that my target thickness was .011".</p><p></p><p>Of everybody else here who has used Winchester WSM brass, did I just get unlucky with the brass I ended up with ?</p><p></p><p>I do know that once I took the time to turn my necks and anneal all of my Win brass, I significantly improved the accuracy and ES/SD from my reloads.</p></blockquote><p></p>
[QUOTE="Timber338, post: 1092288, member: 33822"] I'm interested more details on this comment ... are you just trying to avoid removing too much material and ending up with a neck that is too short? I also re-read my earlier post on thin necks, and I think I could have put more thought into what I wrote. I really was turned off by the variation I was always getting in neck wall thickness of Winchester brass. I agree that thinner necks are not a problem other than they get worked more than thicker brass, but with proper sizing it wasn't too much of an issue. I would cull out brass with thin sections less than .010" thick, and turn the rest so that my target thickness was .011". Of everybody else here who has used Winchester WSM brass, did I just get unlucky with the brass I ended up with ? I do know that once I took the time to turn my necks and anneal all of my Win brass, I significantly improved the accuracy and ES/SD from my reloads. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
WSM Casing life
Top