Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Work of Art is on it's way.
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="GNERGY" data-source="post: 376278"><p><strong>re: Work of Art is here, now the work begins. (Bedding & Finishing)</strong></p><p></p><p>It weighs 4lbs.</p><p>The work continues.</p><p>I had to open up the barrel channel to fit the heavy palma contour bbl.</p><p>Then I drilled the action screw holes bigger to fit the homemade pillars and removed some wood around the lug area and all under the action, except for the end of the tang to accept the Devcon epoxy. I taped inside the stock where I didn't want the devcon to stick, which really made removal of excess epoxy that ran down inside easier. I also taped all around the outside to make cleanup easier ( a Nesika Chad tip I got from one of his bedding posts. I also copied his stock holding jig, but not as nice as his, which really made working on it much easier. Thanks Chad )</p><p><img src="http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1767.jpg?t=1269590106" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p><img src="http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1762.jpg?t=1269589397" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p>I taped up the openings in the bottom of the action with some real thin red tape I had. Also taped the sides, bottom and front of recoil lug with 10 mil tape. Made some 1/4-28 studs and wrapped then with tape to center the studs in my homemade pillars. I coated the action with a couple coats of paste wax and the studs with dielectric ( or silicone ) grease.</p><p><img src="http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1765.jpg?t=1269589925" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p><p><img src="http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1764.jpg?t=1269590018" alt="" class="fr-fic fr-dii fr-draggable " style="" /></p></blockquote><p></p>
[QUOTE="GNERGY, post: 376278"] [b]re: Work of Art is here, now the work begins. (Bedding & Finishing)[/b] It weighs 4lbs. The work continues. I had to open up the barrel channel to fit the heavy palma contour bbl. Then I drilled the action screw holes bigger to fit the homemade pillars and removed some wood around the lug area and all under the action, except for the end of the tang to accept the Devcon epoxy. I taped inside the stock where I didn't want the devcon to stick, which really made removal of excess epoxy that ran down inside easier. I also taped all around the outside to make cleanup easier ( a Nesika Chad tip I got from one of his bedding posts. I also copied his stock holding jig, but not as nice as his, which really made working on it much easier. Thanks Chad ) [IMG]http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1767.jpg?t=1269590106[/IMG] [IMG]http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1762.jpg?t=1269589397[/IMG] I taped up the openings in the bottom of the action with some real thin red tape I had. Also taped the sides, bottom and front of recoil lug with 10 mil tape. Made some 1/4-28 studs and wrapped then with tape to center the studs in my homemade pillars. I coated the action with a couple coats of paste wax and the studs with dielectric ( or silicone ) grease. [IMG]http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1765.jpg?t=1269589925[/IMG] [IMG]http://i957.photobucket.com/albums/ae52/GNERGY/DSCN1764.jpg?t=1269590018[/IMG] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Work of Art is on it's way.
Top