Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Which 6mm in long action Remington 700? Quality Brass is issue...
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MontanaRifleman" data-source="post: 892707" data-attributes="member: 11717"><p>I have what I think is a perfect reamer for the 6-284 from PTG. The neck is .281 and the bullet seated no turn case is .275 The fired case necks are still tight enough to seat a bullet without sizing. </p><p></p><p>There is a good selection of dies available but I would recommend sending a print of the reamer you use to Whidden Gunworks and get a custom FL and seating die made for your chamber. I would recommend an FL die, with or without expander. I would go with an expander. My instruction would be to make the die so it sized the neck down to .271 with a .273 expander to give you .002 tension, or go with an FL die to neck down to .273 without expander. I prefer the expander to move any irregularities in the neck outward. Whidden also provides a depth gauge.</p><p></p><p>I would be willing to rent you my reamer or you could order one for yourself. The print # is 4198</p></blockquote><p></p>
[QUOTE="MontanaRifleman, post: 892707, member: 11717"] I have what I think is a perfect reamer for the 6-284 from PTG. The neck is .281 and the bullet seated no turn case is .275 The fired case necks are still tight enough to seat a bullet without sizing. There is a good selection of dies available but I would recommend sending a print of the reamer you use to Whidden Gunworks and get a custom FL and seating die made for your chamber. I would recommend an FL die, with or without expander. I would go with an expander. My instruction would be to make the die so it sized the neck down to .271 with a .273 expander to give you .002 tension, or go with an FL die to neck down to .273 without expander. I prefer the expander to move any irregularities in the neck outward. Whidden also provides a depth gauge. I would be willing to rent you my reamer or you could order one for yourself. The print # is 4198 [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Which 6mm in long action Remington 700? Quality Brass is issue...
Top