Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What is it with Weatherby's...?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="just country" data-source="post: 1075904" data-attributes="member: 82689"><p>Morning. I own a 340 wea. I bought a box of empty tiger brass old style box. They were tarnished so I ran the brass thru the walnuts.</p><p>I wiped the residue from the brass</p><p>I started prepping the brass for loading. I bloused the mouth of the case. deburred. </p><p>I was checking the primer holes running the brass thru the primer pocket deburring station, I have a RCBS electric station. When I put the reamer into the emply case and the reamer found the primer hole. I noticed that the primer hole in the empty cases was smaller than a normal?? I had to put a small amount of pressure on the case so the reamer would enter the primer hole. Then I took the case of the primer hole reamer turned</p><p> the case around and did the other side of the primer hole to remove any shavings. I did notice the case bottom(web) was thicker because of the magnum caliber of the brass.</p><p> I also own a custom 257Wea. When I preppedgun) this brass the primer hole was good. I still ran the brass thru the primer station.</p><p>I load a large variety of calibers all mine and have never run into this situation. </p><p> </p><p>Any input would b absorbed. Thank U</p></blockquote><p></p>
[QUOTE="just country, post: 1075904, member: 82689"] Morning. I own a 340 wea. I bought a box of empty tiger brass old style box. They were tarnished so I ran the brass thru the walnuts. I wiped the residue from the brass I started prepping the brass for loading. I bloused the mouth of the case. deburred. I was checking the primer holes running the brass thru the primer pocket deburring station, I have a RCBS electric station. When I put the reamer into the emply case and the reamer found the primer hole. I noticed that the primer hole in the empty cases was smaller than a normal?? I had to put a small amount of pressure on the case so the reamer would enter the primer hole. Then I took the case of the primer hole reamer turned the case around and did the other side of the primer hole to remove any shavings. I did notice the case bottom(web) was thicker because of the magnum caliber of the brass. I also own a custom 257Wea. When I preppedgun) this brass the primer hole was good. I still ran the brass thru the primer station. I load a large variety of calibers all mine and have never run into this situation. Any input would b absorbed. Thank U [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What is it with Weatherby's...?
Top