Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What did I do wrong? This sucks!!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BigSkyGP" data-source="post: 486407" data-attributes="member: 28118"><p>Yep, don't get impatient with the one shot drying. Wet one shot sticks as bad as a dry case.</p><p> </p><p>I switched to RCBS spray for the 223, and seems to be working pretty well. As far as I can tell seems to be a spray form of the RCBS grease. I like the way the spray gets to the mouth, neck, and shoulder.</p><p> </p><p>RCBS dies, you have to wedge the expander in the case mouth, and unscrew the decapping/expander stem from the pin holder/expander. Then you have just enough room to drill/tap/screw out the case. Try to miss the pin, and expander that's still in there.</p><p> </p><p>Everything else gets the Lee sizing lube, the white stuff, never stuck a case, from 223-300wm.</p><p> </p><p>clean dies with rubbing alcohol 90% every hundred or so rounds, with Q-tip.</p></blockquote><p></p>
[QUOTE="BigSkyGP, post: 486407, member: 28118"] Yep, don't get impatient with the one shot drying. Wet one shot sticks as bad as a dry case. I switched to RCBS spray for the 223, and seems to be working pretty well. As far as I can tell seems to be a spray form of the RCBS grease. I like the way the spray gets to the mouth, neck, and shoulder. RCBS dies, you have to wedge the expander in the case mouth, and unscrew the decapping/expander stem from the pin holder/expander. Then you have just enough room to drill/tap/screw out the case. Try to miss the pin, and expander that's still in there. Everything else gets the Lee sizing lube, the white stuff, never stuck a case, from 223-300wm. clean dies with rubbing alcohol 90% every hundred or so rounds, with Q-tip. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What did I do wrong? This sucks!!!
Top