Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What bushings do I need?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="L.Sherm" data-source="post: 1344350" data-attributes="member: 102083"><p>I would not use a bump die to neck down as stated above it does not fully support the case. Get a Redding F/L bushing die, your gonna have to change the expander button and possibly rod also. Your necks will get thicker that a typical 7mm possibly and become work hardened so I would anneal and F/L size again after annealing to iron out any neck imperfections. Skim turning the necks would not be a bad idea. The good thing about having a reamer built is you can have the correct freebore and neck dia for the bullet you want to shoot and brass. Just stick with whatever brass you choose because different manufacturers have different neck thickness. Good luck in your build.</p></blockquote><p></p>
[QUOTE="L.Sherm, post: 1344350, member: 102083"] I would not use a bump die to neck down as stated above it does not fully support the case. Get a Redding F/L bushing die, your gonna have to change the expander button and possibly rod also. Your necks will get thicker that a typical 7mm possibly and become work hardened so I would anneal and F/L size again after annealing to iron out any neck imperfections. Skim turning the necks would not be a bad idea. The good thing about having a reamer built is you can have the correct freebore and neck dia for the bullet you want to shoot and brass. Just stick with whatever brass you choose because different manufacturers have different neck thickness. Good luck in your build. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What bushings do I need?
Top