Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
What bore cleaner do you use ?!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Badgerclaw" data-source="post: 1566944" data-attributes="member: 101780"><p>I quit reading at page five. So not sure if someone else mentioned it, but Pro Shot copper Solvant and Pro Shot One Step have worked well for me. I've also used butches bore shine, JB and the KG line of cleaners. The pro shot isn't as aggressive as some cleaners with emonia but works well enough with just a little help from a nylon brush. I put a patch soaked in the copper solvent own the barrel and let it sit for 30 sec. Followed by another wet patch. Then scrub with a nylon brush while the bore is still wet. Let sit for a few minutes, dry patch. Repeat until copper is gone. I then run dry patches through the bore till they come out clean. I run a patch lightly soaked in pro shot one step through the barrel and let it sit. Apparently it is like Kroil in that it penatrates the micro pores of the metal and will lubricate that first bullet down the pipe. After that the barrel should have a thin layer of carbon over the bare metal so no more copper to bare metal contact. I don't know if it's bs or not but my barrels don't copper foul nearly as bad sense I started using the pro shot solvent and oil</p></blockquote><p></p>
[QUOTE="Badgerclaw, post: 1566944, member: 101780"] I quit reading at page five. So not sure if someone else mentioned it, but Pro Shot copper Solvant and Pro Shot One Step have worked well for me. I've also used butches bore shine, JB and the KG line of cleaners. The pro shot isn't as aggressive as some cleaners with emonia but works well enough with just a little help from a nylon brush. I put a patch soaked in the copper solvent own the barrel and let it sit for 30 sec. Followed by another wet patch. Then scrub with a nylon brush while the bore is still wet. Let sit for a few minutes, dry patch. Repeat until copper is gone. I then run dry patches through the bore till they come out clean. I run a patch lightly soaked in pro shot one step through the barrel and let it sit. Apparently it is like Kroil in that it penatrates the micro pores of the metal and will lubricate that first bullet down the pipe. After that the barrel should have a thin layer of carbon over the bare metal so no more copper to bare metal contact. I don't know if it's bs or not but my barrels don't copper foul nearly as bad sense I started using the pro shot solvent and oil [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
What bore cleaner do you use ?!
Top