Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What am I doing wrong with sizing brass?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="K9TXS" data-source="post: 2404624" data-attributes="member: 85208"><p>I had this similar problem, but with a different caliber. I removed the firing pin assembly from my 700 and ran all the ammo through the chamber. I went through 800 rounds. About 75 rounds would not allow the bolt to close as it should or not at all. </p><p></p><p>I checked the neck diameters on the the good rounds vs the rounds that would not chamber and found the no chambering rounds were slightly larger that the good rounds. I pulled the bullet and saved the powder and punched out the primer. I then turned the necks only no sizing etc. Put all back together and it was not perfect.</p><p></p><p>So now after I reload a bunch of rounds I check them all before I go on a hunt.</p></blockquote><p></p>
[QUOTE="K9TXS, post: 2404624, member: 85208"] I had this similar problem, but with a different caliber. I removed the firing pin assembly from my 700 and ran all the ammo through the chamber. I went through 800 rounds. About 75 rounds would not allow the bolt to close as it should or not at all. I checked the neck diameters on the the good rounds vs the rounds that would not chamber and found the no chambering rounds were slightly larger that the good rounds. I pulled the bullet and saved the powder and punched out the primer. I then turned the necks only no sizing etc. Put all back together and it was not perfect. So now after I reload a bunch of rounds I check them all before I go on a hunt. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What am I doing wrong with sizing brass?
Top