Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What am I doing wrong here!!
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="DUSTY NOGGIN" data-source="post: 2227988" data-attributes="member: 89550"><p>RCBS (800) 533-5000</p><p></p><p>the problem with rcbs dies is that they are universal ,in that they oversize at the neck by reducing wayyyy too much on the down , then have to open it back up on the up , spring back happens</p><p></p><p>if your gonna go down rabbit hole getcha a neck turner and all the pilots for every caliber you own. chances are that if ya turn down the neck wall thickness , your rcbs die will still push the outside in the same, BUT the inside will size inward less . many things will help your situationand other problems you havent even had yet ... thinner moves easier , trues up wall variations , make all brass require same seating pressures . plus, ill bet you , you have one in a year anyway ,</p><p></p><p>i think most that do, would agree neck turning is the biggest upgrade to reloading... neck cutters are cheaper than bushing dies... it can essentially make it so you do NOT have to get/pay a bushing die ( depending on measurement of your chamber/ once fired brass ) -- because you can sometimes turn you necks down to match the inexpensive dies internal neck dimensions rather than buying bushings to match the brass</p></blockquote><p></p>
[QUOTE="DUSTY NOGGIN, post: 2227988, member: 89550"] RCBS (800) 533-5000 the problem with rcbs dies is that they are universal ,in that they oversize at the neck by reducing wayyyy too much on the down , then have to open it back up on the up , spring back happens if your gonna go down rabbit hole getcha a neck turner and all the pilots for every caliber you own. chances are that if ya turn down the neck wall thickness , your rcbs die will still push the outside in the same, BUT the inside will size inward less . many things will help your situationand other problems you havent even had yet ... thinner moves easier , trues up wall variations , make all brass require same seating pressures . plus, ill bet you , you have one in a year anyway , i think most that do, would agree neck turning is the biggest upgrade to reloading... neck cutters are cheaper than bushing dies... it can essentially make it so you do NOT have to get/pay a bushing die ( depending on measurement of your chamber/ once fired brass ) -- because you can sometimes turn you necks down to match the inexpensive dies internal neck dimensions rather than buying bushings to match the brass [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
What am I doing wrong here!!
Top