Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
What’s flatter 6.5PRC or 280ai??
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BrentM" data-source="post: 1802235" data-attributes="member: 61747"><p>No, realistic. I used very comparable BC values for a reason. Regardless, the BC of the 162 which I use too is higher at 670. When running it at the same speed, which it does, it nets .3 moa difference at 600. The bearing surface on the 162 is massive comparte to the vld so the speed difference to pressure is virtually the same.</p><p></p><p>In the end it is 9.2 (162) vs 6.8 (135) or 2.4 moa difference at 600 or 15".</p><p></p><p>I like the 7mm but I'd take a 156 EOL in the 6.5 at virtually the same speed without hesitation. I run a 156 at 2910 in a 22" and know this bullet runs 3000 plus in a 26. IF you compare the 162 at 3k to the 156 at 3k the 2 bullets are virtually identical in performance.</p></blockquote><p></p>
[QUOTE="BrentM, post: 1802235, member: 61747"] No, realistic. I used very comparable BC values for a reason. Regardless, the BC of the 162 which I use too is higher at 670. When running it at the same speed, which it does, it nets .3 moa difference at 600. The bearing surface on the 162 is massive comparte to the vld so the speed difference to pressure is virtually the same. In the end it is 9.2 (162) vs 6.8 (135) or 2.4 moa difference at 600 or 15". I like the 7mm but I'd take a 156 EOL in the 6.5 at virtually the same speed without hesitation. I run a 156 at 2910 in a 22" and know this bullet runs 3000 plus in a 26. IF you compare the 162 at 3k to the 156 at 3k the 2 bullets are virtually identical in performance. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
What’s flatter 6.5PRC or 280ai??
Top