Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
VX6 HD Battery Change....need help Guys
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Wedgy" data-source="post: 2011818" data-attributes="member: 64108"><p>[URL unfurl="true"]https://cdnp.leupold.com/products/productDownloads/vx-6_hd_riflescopemanual_18x12.pdf?mtime=20190613111444[/URL]</p><p>LEVELING THE RIFLESCOPE (All VX-6HD scopes are equipped with an Electronic Reticle Level) 1. Begin by leveling the rifle in a vice or steady rest. 2. To activate the Electronic Reticle Level, press and hold the illumination button for fifteen seconds. The reticle will blink once at 5 seconds and again at 10 seconds. After 15 seconds, the reticle will flash twice indicating the Electronic Level is ON. Release the button and press it again to turn ON the illumination. If you repeat the steps above, the reticle will flash 3 times indicating the Electronic Reticle Level is OFF. 3. Without changing your eye relief settings from the previous section, rotate the scope so the reticle is noticeably out of level. The reticle will begin flashing. If rotated past 30 degrees, the illumination will turn off.</p></blockquote><p></p>
[QUOTE="Wedgy, post: 2011818, member: 64108"] [URL unfurl="true"]https://cdnp.leupold.com/products/productDownloads/vx-6_hd_riflescopemanual_18x12.pdf?mtime=20190613111444[/URL] LEVELING THE RIFLESCOPE (All VX-6HD scopes are equipped with an Electronic Reticle Level) 1. Begin by leveling the rifle in a vice or steady rest. 2. To activate the Electronic Reticle Level, press and hold the illumination button for fifteen seconds. The reticle will blink once at 5 seconds and again at 10 seconds. After 15 seconds, the reticle will flash twice indicating the Electronic Level is ON. Release the button and press it again to turn ON the illumination. If you repeat the steps above, the reticle will flash 3 times indicating the Electronic Reticle Level is OFF. 3. Without changing your eye relief settings from the previous section, rotate the scope so the reticle is noticeably out of level. The reticle will begin flashing. If rotated past 30 degrees, the illumination will turn off. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Long Range Scopes and Other Optics
VX6 HD Battery Change....need help Guys
Top