Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Velocity increase
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Monterey21" data-source="post: 1960119" data-attributes="member: 105626"><p>Morning all, I'm reaching out to the experience of the group. Have a new project that I have been working on for a few months. 6.5X284, SR3 long action, AG Composites, B&A trigger, and Preferred Barrel Blanks pre-fit with Zermatt /Savage nut. Their #4 contour. The issue is from cold bore the velocity increases for 3 or 4 shots until heat gets in the barrel then the velocity stabilizes at about 10FPS ES or less. point of impact changes, gets higher@ 100yds, with the first two rounds then is 1/2 MOA or so. Depending on me. The load is 53.5 4831SC with 140 Berger Elite hunter and a CCI match primer .010 off the lands. Same everything with 57.0 N565 is a little faster. </p><p>the question is why does it get faster with heat? I understand the bore can get tighter, bullet gets tighter, better seal in theory.</p></blockquote><p></p>
[QUOTE="Monterey21, post: 1960119, member: 105626"] Morning all, I’m reaching out to the experience of the group. Have a new project that I have been working on for a few months. 6.5X284, SR3 long action, AG Composites, B&A trigger, and Preferred Barrel Blanks pre-fit with Zermatt /Savage nut. Their #4 contour. The issue is from cold bore the velocity increases for 3 or 4 shots until heat gets in the barrel then the velocity stabilizes at about 10FPS ES or less. point of impact changes, gets higher@ 100yds, with the first two rounds then is 1/2 MOA or so. Depending on me. The load is 53.5 4831SC with 140 Berger Elite hunter and a CCI match primer .010 off the lands. Same everything with 57.0 N565 is a little faster. the question is why does it get faster with heat? I understand the bore can get tighter, bullet gets tighter, better seal in theory. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Velocity increase
Top