Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Understanding Body Taper on a Reamer Print
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="can1010" data-source="post: 1526757" data-attributes="member: 43193"><p>your numbers come out to be 0.05555554 which will be pretty light and might have high pressure extraction issues. </p><p>that was figured out assuming 0.500 was at the 0.200 line above bolt face. some drawings will use a lower number and that will change the calculation </p><p>some guys will tell you to stay at .080 or higher to avoid possible extraction issues</p></blockquote><p></p>
[QUOTE="can1010, post: 1526757, member: 43193"] your numbers come out to be 0.05555554 which will be pretty light and might have high pressure extraction issues. that was figured out assuming 0.500 was at the 0.200 line above bolt face. some drawings will use a lower number and that will change the calculation some guys will tell you to stay at .080 or higher to avoid possible extraction issues [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Understanding Body Taper on a Reamer Print
Top