archanfire
Well-Known Member
Decided to list my ATACR. I purchased new, had it sitting around for a bit, mounted it on my OBR to test handloads and decided it's more magnification than I plan to use. I mounted it in the Nightforce rings(pictured), decided I didn't like the height, so I placed in the JP Enterprise mount(also pictured) where I left it for a couple of weeks. There is a local gentleman that seemed deeply interested it, but backed out due to funds availability after I had unmounted the scope. There is a VERY feint ring mark on the objective half of the tube(pictured), but I do not see anything other than that. It has both lens covers, I just always take the rear off when I shoot. This scope has a total of 10 rounds of 308 through it.
-The scope-I prefer cash, which I'm looking for $2,475 plus ACTUAL shipping with tracking. I can insure it for full amount should the interested party want it. As stated, I feel I started out a little big, so I am open to trades+cash offers for it's smaller bother, the 4-16 F1(I'm not picky about reticle as I need to learn mils anyway). I would prefer as close to equal condition as possible, so please none that have been to Hell and back.
-The rings and the mount are available separately. I'm asking an additional $75 for the rings(which should yield the buyer double that if they want to flip them after purchase). Anyone interested in the scope gets first call on the rings. I will wait a few days from now to see if there are any takers on the scope. If not, I will start replying to messages to people who want the rings.
-The offset mount is again a JP Enterprise I purchased for this scope, so with the scope gone I no longer need it. I had the mount coated by CCR it TN. The black is tougher than anodizing, and the screws were plated it a NiB/Teflon blend(also done by CCR) which keeps them from rusting. Reasons I had this done was fur better durability and one less thing to worry about in adverse weather. Looking for $225 for the mount. The screws are non reflective,
If you have any questions, concerns or want extra pics, let me know via site messaging, or text me at 4one7-four3seven-8three2three
Thanks for your time
-justin
-The scope-I prefer cash, which I'm looking for $2,475 plus ACTUAL shipping with tracking. I can insure it for full amount should the interested party want it. As stated, I feel I started out a little big, so I am open to trades+cash offers for it's smaller bother, the 4-16 F1(I'm not picky about reticle as I need to learn mils anyway). I would prefer as close to equal condition as possible, so please none that have been to Hell and back.
-The rings and the mount are available separately. I'm asking an additional $75 for the rings(which should yield the buyer double that if they want to flip them after purchase). Anyone interested in the scope gets first call on the rings. I will wait a few days from now to see if there are any takers on the scope. If not, I will start replying to messages to people who want the rings.
-The offset mount is again a JP Enterprise I purchased for this scope, so with the scope gone I no longer need it. I had the mount coated by CCR it TN. The black is tougher than anodizing, and the screws were plated it a NiB/Teflon blend(also done by CCR) which keeps them from rusting. Reasons I had this done was fur better durability and one less thing to worry about in adverse weather. Looking for $225 for the mount. The screws are non reflective,
If you have any questions, concerns or want extra pics, let me know via site messaging, or text me at 4one7-four3seven-8three2three
Thanks for your time
-justin
Attachments
-
20220210_221325_2.jpg524.3 KB · Views: 72
-
20220210_221341_2.jpg487 KB · Views: 77
-
20220210_221406_2.jpg433.1 KB · Views: 68
-
20220210_221611_2.jpg481 KB · Views: 111
-
20220210_222634_2.jpg302.9 KB · Views: 108
-
20220210_222644_2.jpg372.1 KB · Views: 102
-
20220216_233937.jpg370.6 KB · Views: 60
-
20220210_222723.jpg475.4 KB · Views: 75
Last edited: