Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
To shim or not to shim
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Blackhawk" data-source="post: 2023479" data-attributes="member: 105459"><p><strong><em>Working to obtain a 0 reference at 100 yards</em></strong></p><p><em> <strong>Rehash:</strong></em></p><p><em>This is strictly in the load development faze as due to a powder shortage of Alliant RL-22 I had to switch to Hodgdon H 4350. With the Hodgdon's powder my POI at 100 Yards was now 2.000"high and my Nikon Monarch Scopes elevation knob is now .bottomed out, but was shooting sub 1/2" MOA @100yards with the Alliant Powder.</em></p><p><em>Note I removed my scope and re-tensioned it back to Zero, on both the Elevation and Windage turrets,</em></p><p><em>I ordered sat set of High Burris Z rings and ordered the + -.005"', + - .010", & + - .020 supplemental insert set.</em></p><p><em>I now must start my process all over again.</em></p><p><em>Thanks for Asking,& yeah I could have left my Nikon Monarch Scope alone my elevation was bottomed out, and that is not correct as I would not have been able to properly adjust for anything longer than 200 yards, so I need to come up with a solution and I thank the forum members for their input.</em></p></blockquote><p></p>
[QUOTE="Blackhawk, post: 2023479, member: 105459"] [B][I]Working to obtain a 0 reference at 100 yards[/I][/B] [I] [B]Rehash:[/B] This is strictly in the load development faze as due to a powder shortage of Alliant RL-22 I had to switch to Hodgdon H 4350. With the Hodgdon's powder my POI at 100 Yards was now 2.000"high and my Nikon Monarch Scopes elevation knob is now .bottomed out, but was shooting sub 1/2" MOA @100yards with the Alliant Powder. Note I removed my scope and re-tensioned it back to Zero, on both the Elevation and Windage turrets, I ordered sat set of High Burris Z rings and ordered the + -.005"', + - .010", & + - .020 supplemental insert set. I now must start my process all over again. Thanks for Asking,& yeah I could have left my Nikon Monarch Scope alone my elevation was bottomed out, and that is not correct as I would not have been able to properly adjust for anything longer than 200 yards, so I need to come up with a solution and I thank the forum members for their input.[/I] [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
To shim or not to shim
Top