Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
The Basics, Starting Out
Tikka, Australia, and F-Class
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="WildRose" data-source="post: 731698" data-attributes="member: 30902"><p>Seth Short term there's a cheap way to help that plastic stock out quite a bit.</p><p></p><p>Get someone with router to take as much meat as they can out of the barrel channel. Then use Marine Tex or Devcon mixed with lead shot or steel filings from a machine shop and refill the BC with it. For additional stiffness you can also lay down a piece or two of 1/8" steel rod running the full length from the front to the barrel lug.</p><p></p><p></p><p>When doing this put a couple of strips of duct tape on the bottom of the barrel running the full length from the barrel lug to the end of the stock.</p><p></p><p>When you have that done just drop it back in on top of the epoxy and tighten your action screws. Let it get firm and then just trim off the excess with a razor knife.</p><p></p><p>Once fully set, remove the action, remove the tape and put it back together. You will have a much stiffer stock than before with additional weight in the forearm to help with muzzle flip and steadiness, and a completely free floated barrel.</p><p></p><p>It's worked well enough for me on some plastic stocks that I was going to replace I then found no need to replace at all saving myself literally hundreds of dollars.</p></blockquote><p></p>
[QUOTE="WildRose, post: 731698, member: 30902"] Seth Short term there's a cheap way to help that plastic stock out quite a bit. Get someone with router to take as much meat as they can out of the barrel channel. Then use Marine Tex or Devcon mixed with lead shot or steel filings from a machine shop and refill the BC with it. For additional stiffness you can also lay down a piece or two of 1/8" steel rod running the full length from the front to the barrel lug. When doing this put a couple of strips of duct tape on the bottom of the barrel running the full length from the barrel lug to the end of the stock. When you have that done just drop it back in on top of the epoxy and tighten your action screws. Let it get firm and then just trim off the excess with a razor knife. Once fully set, remove the action, remove the tape and put it back together. You will have a much stiffer stock than before with additional weight in the forearm to help with muzzle flip and steadiness, and a completely free floated barrel. It's worked well enough for me on some plastic stocks that I was going to replace I then found no need to replace at all saving myself literally hundreds of dollars. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
The Basics, Starting Out
Tikka, Australia, and F-Class
Top