Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tikka 6.5 PRC build
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="25WSM" data-source="post: 2009956" data-attributes="member: 38048"><p>I thought you had 300wsm as one option. The 300wm and 7mag both are the same except barrel. Good actions. I just built one almost identical to what you want. Same stock but I went with aluminum bottom metal. I used a proof carbon in sendero lite and got the 1.2 tennon dia. So I faced off the front of the action and that barrel fits perfect to the flats. No muzzle brake required on this set up. Not much recoil even with 147s over 3000fps.</p><p>Shep</p></blockquote><p></p>
[QUOTE="25WSM, post: 2009956, member: 38048"] I thought you had 300wsm as one option. The 300wm and 7mag both are the same except barrel. Good actions. I just built one almost identical to what you want. Same stock but I went with aluminum bottom metal. I used a proof carbon in sendero lite and got the 1.2 tennon dia. So I faced off the front of the action and that barrel fits perfect to the flats. No muzzle brake required on this set up. Not much recoil even with 147s over 3000fps. Shep [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Tikka 6.5 PRC build
Top