Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Thoughts from the pro's
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Mainmechanic" data-source="post: 1623440" data-attributes="member: 109300"><p>Gentlemen. From my previous posts I have said I don't claim to be a gunsmith .Spent the majority of my life in a machine shop. With that being said I can fully appreciate a square true rifle action. Read a lot about recurring action threads true to bolt raceways. My questions. 1 - could I make a fixture similar to a threaded barrel tenon and several inches of barrel that I can screw into the receiver that I could then chuck in my lathe and then cut my receiver face true to the threads ? Would save recutting receiver threads and shortening and recutting barrel threads thus changing bedding. Would also be able to drill a hole in this fixture and apply pressure to bolt to lap lugs and also recut bolt face. Any thoughts on this would be appreciated. Have more to say just don't want this to get any longer than it is. Best regards</p></blockquote><p></p>
[QUOTE="Mainmechanic, post: 1623440, member: 109300"] Gentlemen. From my previous posts I have said I don't claim to be a gunsmith .Spent the majority of my life in a machine shop. With that being said I can fully appreciate a square true rifle action. Read a lot about recurring action threads true to bolt raceways. My questions. 1 - could I make a fixture similar to a threaded barrel tenon and several inches of barrel that I can screw into the receiver that I could then chuck in my lathe and then cut my receiver face true to the threads ? Would save recutting receiver threads and shortening and recutting barrel threads thus changing bedding. Would also be able to drill a hole in this fixture and apply pressure to bolt to lap lugs and also recut bolt face. Any thoughts on this would be appreciated. Have more to say just don't want this to get any longer than it is. Best regards [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
Thoughts from the pro's
Top