Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The Tale of the 6.5 PRC
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="PatriotHenry" data-source="post: 1960215" data-attributes="member: 114356"><p>Fly Guy,</p><p>Thanks for providing that load data. Been hard to find any, besides Hornady. I just started with RL26 and the 143ELDX the node that looks the best for me so far in my Rifle Seekins Havak 24" 1-8. Is 57 gr RL26, GM210M primer COAL 2.950 NEW ADG brass. (tested GM215M also and an ES of 8 SD of 3 was better with 210's no major change in MV ave. 2947. The GM215M's are the only thing available now, and you should be fine with them. I scooped up a few more bricks recently.</p><p>That data looks extremely hot on the high end. I did test up to 57.4gr (still no horrible pressure in my rifle but velocity dropped. "diminishing returns" Maybe there is another node higher, but I don't want to try. I am using Hornady Match Bushing dies (because Redding is shut down due to the PLANDEMIC, wanted their bushing dies). I have not resized anything yet. (just got the rifle in June). I started some loads with H1000, promising results with the same specs as above there is a node @ 59gr-59.4 in my rifle with nearly identical MV. I will be shooting groups at distance tomorrow and will report back. </p><p></p><p>Good luck!</p></blockquote><p></p>
[QUOTE="PatriotHenry, post: 1960215, member: 114356"] Fly Guy, Thanks for providing that load data. Been hard to find any, besides Hornady. I just started with RL26 and the 143ELDX the node that looks the best for me so far in my Rifle Seekins Havak 24" 1-8. Is 57 gr RL26, GM210M primer COAL 2.950 NEW ADG brass. (tested GM215M also and an ES of 8 SD of 3 was better with 210's no major change in MV ave. 2947. The GM215M's are the only thing available now, and you should be fine with them. I scooped up a few more bricks recently. That data looks extremely hot on the high end. I did test up to 57.4gr (still no horrible pressure in my rifle but velocity dropped. "diminishing returns" Maybe there is another node higher, but I don't want to try. I am using Hornady Match Bushing dies (because Redding is shut down due to the PLANDEMIC, wanted their bushing dies). I have not resized anything yet. (just got the rifle in June). I started some loads with H1000, promising results with the same specs as above there is a node @ 59gr-59.4 in my rifle with nearly identical MV. I will be shooting groups at distance tomorrow and will report back. Good luck! [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
The Tale of the 6.5 PRC
Top