Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Deer Hunting
subsonic hunting loads for 308win?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="jimbires" data-source="post: 1381391" data-attributes="member: 11011"><p>here you go . </p><p>info from Speer # 13 page # 278 - 285</p><p>308 win;</p><p>110 grain jacket</p><p>IMR4198 min 26.0 1927 fps - max 30.0 2268</p><p></p><p>125 grain / 130 grain </p><p>IMR 4198 min 25.0 1969 FPS - max 29.0 2185 FPS </p><p> *( I used a 125 nosler ballistic tip with 27.0 grain IMR 4198 CCI 200 primer , this load worked flawless )*</p><p> </p><p>180 grain </p><p>IMR 4198 min 24.0 1591 FPS - max 28.0 1854 FPS </p><p></p><p>200grain </p><p>IMR4198 min 24.0 1514 FPS - max 28.0 ( compressed ) 1757</p><p></p><p>****************these loads use IMR SR4759 . ********************</p><p></p><p>150 grain </p><p> SR4759 min 21.0 1632 FPS - max 25.0 1925 FPS </p><p></p><p>165 grain </p><p> SR4759 22.0 min 1639FPS - 24.0 max 1805 FPS </p><p></p><p></p><p> I had worked reducing a load in a 30.06 for a young boy using IMR SR4759. I had trouble finding IMR SR4759 , I did find some . I had problems with hang fires . I believe it was due to the large case capacity of the 30.06 , the powder could get to far away from the primer . if I tipped the rifle bbl up then lowered to the target it would fire normally . I tried using a case filler , dacron , to hold the powder back against the primer but the powder mixed in with the filler giving me the same hang fire problem . I don't think it was a powder problem , I think it was just a bad combination . just keep this hang fire on your mind when using reduced loads . it can cause a very high pressure spike , just like to much powder .</p></blockquote><p></p>
[QUOTE="jimbires, post: 1381391, member: 11011"] here you go . info from Speer # 13 page # 278 - 285 308 win; 110 grain jacket IMR4198 min 26.0 1927 fps - max 30.0 2268 125 grain / 130 grain IMR 4198 min 25.0 1969 FPS - max 29.0 2185 FPS *( I used a 125 nosler ballistic tip with 27.0 grain IMR 4198 CCI 200 primer , this load worked flawless )* 180 grain IMR 4198 min 24.0 1591 FPS - max 28.0 1854 FPS 200grain IMR4198 min 24.0 1514 FPS - max 28.0 ( compressed ) 1757 ****************these loads use IMR SR4759 . ******************** 150 grain SR4759 min 21.0 1632 FPS - max 25.0 1925 FPS 165 grain SR4759 22.0 min 1639FPS - 24.0 max 1805 FPS I had worked reducing a load in a 30.06 for a young boy using IMR SR4759. I had trouble finding IMR SR4759 , I did find some . I had problems with hang fires . I believe it was due to the large case capacity of the 30.06 , the powder could get to far away from the primer . if I tipped the rifle bbl up then lowered to the target it would fire normally . I tried using a case filler , dacron , to hold the powder back against the primer but the powder mixed in with the filler giving me the same hang fire problem . I don't think it was a powder problem , I think it was just a bad combination . just keep this hang fire on your mind when using reduced loads . it can cause a very high pressure spike , just like to much powder . [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Deer Hunting
subsonic hunting loads for 308win?
Top