Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Starline CF brass questions
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Tac-O" data-source="post: 1967826" data-attributes="member: 109994"><p>1</p><p></p><p>I don't use any lube on the inside of the case neck when sizing or seating. It never seemed to be a problem with the virgin Winchester cases I have used. </p><p></p><p>Yes I also chamfer them. My virgin brass prep is as follows:</p><p></p><p>-Uniform flash hole I'd needed (hasn't been needed on starline!)</p><p>-thin layer of Lee case lube on case body up to shoulder allowed to dry</p><p>- FL size, wipe off lube</p><p>- trim if needed (starline lengths have been pretty darn uniform at start)</p><p>- chamfer mouth</p><p>- debur outside of mouth</p><p>- no lube used when seating bullets (if it's fired brass, I'll use a stiff brush on the inside of the neck before sizing, but that's it)</p></blockquote><p></p>
[QUOTE="Tac-O, post: 1967826, member: 109994"] 1 I don't use any lube on the inside of the case neck when sizing or seating. It never seemed to be a problem with the virgin Winchester cases I have used. Yes I also chamfer them. My virgin brass prep is as follows: -Uniform flash hole I'd needed (hasn't been needed on starline!) -thin layer of Lee case lube on case body up to shoulder allowed to dry - FL size, wipe off lube - trim if needed (starline lengths have been pretty darn uniform at start) - chamfer mouth - debur outside of mouth - no lube used when seating bullets (if it's fired brass, I'll use a stiff brush on the inside of the neck before sizing, but that's it) [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Starline CF brass questions
Top