Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Stag 10 accuracy issues and thanks for the add to the forum
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="Michael Smith" data-source="post: 1689707" data-attributes="member: 105127"><p>Cohunt</p><p>He sent it back to Stag and they put and AGB on it. I will look for the indicators you mentioned. Haven't tried Varget I have loaded RL16 and RL17 also neither made a difference. I will check the neck tension the earlier loads were with Hornady dies. I have since gotten a Forster sizing die and Forster Micrometer seater die. I have a mandrel die I run the creedmoor brass through for the bolt guns. Gives a neck tension of .002. That may not be enough the Forster sizing die runs about .004 neck tension. I have two ar15 platform rifles and there is a learning curve to shoot accurately with them. I will check the ejection pattern but as far as the ejector swipes I was thinking more of a chamber/headspace issue. I will have some data Monday after I run these loads through it. Thanks for your input.</p></blockquote><p></p>
[QUOTE="Michael Smith, post: 1689707, member: 105127"] Cohunt He sent it back to Stag and they put and AGB on it. I will look for the indicators you mentioned. Haven't tried Varget I have loaded RL16 and RL17 also neither made a difference. I will check the neck tension the earlier loads were with Hornady dies. I have since gotten a Forster sizing die and Forster Micrometer seater die. I have a mandrel die I run the creedmoor brass through for the bolt guns. Gives a neck tension of .002. That may not be enough the Forster sizing die runs about .004 neck tension. I have two ar15 platform rifles and there is a learning curve to shoot accurately with them. I will check the ejection pattern but as far as the ejector swipes I was thinking more of a chamber/headspace issue. I will have some data Monday after I run these loads through it. Thanks for your input. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
AR15/10 Rifles
Stag 10 accuracy issues and thanks for the add to the forum
Top