Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
sheared base screws
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="25WSM" data-source="post: 1884829" data-attributes="member: 38048"><p>Just pin it. I use a #31 drill bit in a drill press. Drill right through the base into the receiver. Don't go all the way through the receiver. I usually put them right between the mounting screw holes. After drilling this .120 diameter hole take an 1/8 drill bit and cut a few pins from it with a cutoff wheel. This is .005 bigger than the hole you drilled. One drop of red locktite and tap the pins in. A small chamfer on the bottom of the pin helps it start in. Practically anyone can do this. These pins are much stronger than screws. I do all my actions like this. Go to 8-40 screws and pins. All on a bedded base. No more problems.</p><p>Shep</p></blockquote><p></p>
[QUOTE="25WSM, post: 1884829, member: 38048"] Just pin it. I use a #31 drill bit in a drill press. Drill right through the base into the receiver. Don't go all the way through the receiver. I usually put them right between the mounting screw holes. After drilling this .120 diameter hole take an 1/8 drill bit and cut a few pins from it with a cutoff wheel. This is .005 bigger than the hole you drilled. One drop of red locktite and tap the pins in. A small chamfer on the bottom of the pin helps it start in. Practically anyone can do this. These pins are much stronger than screws. I do all my actions like this. Go to 8-40 screws and pins. All on a bedded base. No more problems. Shep [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Gunsmithing
sheared base screws
Top