Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sendero sfii 7mm Rem mag eld-X 175 grain load help
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="elj1973" data-source="post: 1463244" data-attributes="member: 106376"><p>New to the forum and a fairly new to reloading. I have a Remington Sendero Sfii in 7mm Rem mag, with factory 26 in 1:9.25 twist barrel with O.A.L. Of 2.746 touching lands. Have read that this set-up will shoot the heavy pills (175-180's) quite well. So looking at loading up some 175 grain ELD-x's for a up coming Wy. Elk hunt. But now here is the issue, load data in Hornady book has a start of retumbo at 59.7 and max 65.4 gr and is only 2700 fps. Is this accurate? Looking at hodgon site data its shows a 180 vld start of 64.4 and max of 70.8 at 2900 fps also a 175 gr nos part start 64 with max of 68 gr at 2800 fps. Is Hornady data on the low side there's not a lot out there for the eld-X in the 175 grain. Thinking of starting at .010 off lands, federal new brass and 215m primer at 60.5 grains and work up .3 shooting for 2950'ish sound safe? And is the 2950 fps possible with that combo and will the 175 eld-X stabilize with that 9.25 twist?</p></blockquote><p></p>
[QUOTE="elj1973, post: 1463244, member: 106376"] New to the forum and a fairly new to reloading. I have a Remington Sendero Sfii in 7mm Rem mag, with factory 26 in 1:9.25 twist barrel with O.A.L. Of 2.746 touching lands. Have read that this set-up will shoot the heavy pills (175-180's) quite well. So looking at loading up some 175 grain ELD-x's for a up coming Wy. Elk hunt. But now here is the issue, load data in Hornady book has a start of retumbo at 59.7 and max 65.4 gr and is only 2700 fps. Is this accurate? Looking at hodgon site data its shows a 180 vld start of 64.4 and max of 70.8 at 2900 fps also a 175 gr nos part start 64 with max of 68 gr at 2800 fps. Is Hornady data on the low side there's not a lot out there for the eld-X in the 175 grain. Thinking of starting at .010 off lands, federal new brass and 215m primer at 60.5 grains and work up .3 shooting for 2950'ish sound safe? And is the 2950 fps possible with that combo and will the 175 eld-X stabilize with that 9.25 twist? [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Sendero sfii 7mm Rem mag eld-X 175 grain load help
Top