Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
seating die for sciroccos
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BountyHunter" data-source="post: 103777" data-attributes="member: 12"><p>If you are neck turning there is one neck turner that will cut the donut out. That is the K&amp;M turner and it comes with a carbide donut cutter. </p><p></p><p>You must use the KM expander.</p><p></p><p>Joel Pendegraft on BR central classifieds "Tools" or PM him, sells a great little holder for the KM turner that fits the hand perfectly.</p><p></p><p>My steps.</p><p></p><p>1. FL size</p><p></p><p>2. Expand necks with matching mandrels. Get a mandrel tha is exact size for your cutter.</p><p></p><p>3. Lube the necks (sizing die wax, FP10, engine assembly lube etc)</p><p></p><p>4. I use a B&amp;D power screwdriver with extra batteries, and sinclair caseholder driver ((# 05-200) $10.95 and matching caseholder (05-210 etc) for $13.95. Turns at 180 RPM which is perfect speed to not leave grooves on neck. I get about 25-40 cases per battery. </p><p></p><p>5. Practice on old cases and find if you can take the cut in one pass (normally .004 or less) or multiple passes will be needed. </p><p></p><p>6. Holland and sinclair both make great case neck micrometers which is essential. </p><p></p><p>7. I use the Holland VLD case mouth camfer tool to chamfer the case mouths.</p><p></p><p>Do not allow the cutter to get hot, set on rag on ice or something cool. Make slow smooth cuts. Practic on old and measure twice before cutting all.</p><p></p><p>BH</p></blockquote><p></p>
[QUOTE="BountyHunter, post: 103777, member: 12"] If you are neck turning there is one neck turner that will cut the donut out. That is the K&M turner and it comes with a carbide donut cutter. You must use the KM expander. Joel Pendegraft on BR central classifieds "Tools" or PM him, sells a great little holder for the KM turner that fits the hand perfectly. My steps. 1. FL size 2. Expand necks with matching mandrels. Get a mandrel tha is exact size for your cutter. 3. Lube the necks (sizing die wax, FP10, engine assembly lube etc) 4. I use a B&D power screwdriver with extra batteries, and sinclair caseholder driver ((# 05-200) $10.95 and matching caseholder (05-210 etc) for $13.95. Turns at 180 RPM which is perfect speed to not leave grooves on neck. I get about 25-40 cases per battery. 5. Practice on old cases and find if you can take the cut in one pass (normally .004 or less) or multiple passes will be needed. 6. Holland and sinclair both make great case neck micrometers which is essential. 7. I use the Holland VLD case mouth camfer tool to chamfer the case mouths. Do not allow the cutter to get hot, set on rag on ice or something cool. Make slow smooth cuts. Practic on old and measure twice before cutting all. BH [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
seating die for sciroccos
Top