Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Seater die for 285gr eldm
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="MTbackwoods" data-source="post: 1952756" data-attributes="member: 113441"><p>The custom grade dies come with the ELD seating stem. But you cannot seat 300 gr Bergers with it if that matters. I don't measure COAL because I single feed any way. And the dies are very consistent. I bought the micrometer for the seating die and I highly recommend it. I measure every single cartridge for CBTO and rarely have to make adjustments. But I always back it off a few thousandths, run it, measure, and adjust as necessary. Rifle shoots .5 and has an ES of 6 with a muzzle velocity of 2876 with 87.6 gr of RL26 and CCI 200 primers</p></blockquote><p></p>
[QUOTE="MTbackwoods, post: 1952756, member: 113441"] The custom grade dies come with the ELD seating stem. But you cannot seat 300 gr Bergers with it if that matters. I don’t measure COAL because I single feed any way. And the dies are very consistent. I bought the micrometer for the seating die and I highly recommend it. I measure every single cartridge for CBTO and rarely have to make adjustments. But I always back it off a few thousandths, run it, measure, and adjust as necessary. Rifle shoots .5 and has an ES of 6 with a muzzle velocity of 2876 with 87.6 gr of RL26 and CCI 200 primers [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Reloading
Seater die for 285gr eldm
Top