Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Hunting
Long Range Hunting & Shooting
Scope adjustments?
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="huntsman22" data-source="post: 2810841" data-attributes="member: 88545"><p>16 17</p><p>Re-Zeroing Your Scope</p><p>Certain Sightron riflescope models are</p><p>resettable to zero after sighting in your riflescope.</p><p>1. Models with Locking Turret.</p><p>To reset the Locking</p><p>Turret to zero, simply loos-</p><p>en the three 1.27mm Allen</p><p>Screws located around the</p><p>top lip of the turret knob.</p><p>Rotate the turret knob</p><p>to zero aligning with the</p><p>revolution counter under</p><p>the turret knob and tighten the three set screws</p><p>evenly around the turret knob.</p><p>Note: Do not remove the 3mm Allen Screw</p><p>located on top of the turret knob.</p><p>2. Target Models.</p><p>To re-zero all target models loosen either the</p><p>1.5mm or 1.27mm Allen Screws located around</p><p>the top lip of the turret knob or Torx 20 screws</p><p>located at the top of the turret knob. Rotate the</p><p>knob until the zero mark lines up with the index</p><p>line on the revolution scale underneath the turret</p><p>knob. Re-tighten the Allen or Torx screws.</p></blockquote><p></p>
[QUOTE="huntsman22, post: 2810841, member: 88545"] 16 17 Re-Zeroing Your Scope Certain Sightron riflescope models are resettable to zero after sighting in your riflescope. 1. Models with Locking Turret. To reset the Locking Turret to zero, simply loos- en the three 1.27mm Allen Screws located around the top lip of the turret knob. Rotate the turret knob to zero aligning with the revolution counter under the turret knob and tighten the three set screws evenly around the turret knob. Note: Do not remove the 3mm Allen Screw located on top of the turret knob. 2. Target Models. To re-zero all target models loosen either the 1.5mm or 1.27mm Allen Screws located around the top lip of the turret knob or Torx 20 screws located at the top of the turret knob. Rotate the knob until the zero mark lines up with the index line on the revolution scale underneath the turret knob. Re-tighten the Allen or Torx screws. [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Hunting
Long Range Hunting & Shooting
Scope adjustments?
Top