Forums
New posts
Search forums
What's new
Articles
Latest reviews
Author list
Classifieds
Log in
Register
What's new
Search
Search
Search titles and first posts only
Search titles only
By:
New posts
Search forums
Menu
Log in
Register
Install the app
Install
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Run out
JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser
.
Reply to thread
Message
<blockquote data-quote="BountyHunter" data-source="post: 25298" data-attributes="member: 12"><p>Brent</p><p></p><p>Jim charges $35 for his conversion using redding or wilson neck dies.</p><p></p><p>If you want down on the shoulder such a neck size and shoulder bump there is only one die that does that. Neil Jones makes a custom FL shoulder bump die ( $175 for die and his custom bushings $14). He needs three pieces of brass that have been fired in "your" gun 3 times. Now if you are doing a wildcat with shoulder blown forward and out, he will make the die a Neck size only to allow you to fire some brass. Send the brass and die back to him and he changes the insert in the die to shoulder bump at no extra charge. Only guy around that does that and his dies are the Rolls Royce of dies for 1K BR shooters but still at reasonable prices.</p><p>\</p><p>Good Luck</p><p></p><p>BH</p></blockquote><p></p>
[QUOTE="BountyHunter, post: 25298, member: 12"] Brent Jim charges $35 for his conversion using redding or wilson neck dies. If you want down on the shoulder such a neck size and shoulder bump there is only one die that does that. Neil Jones makes a custom FL shoulder bump die ( $175 for die and his custom bushings $14). He needs three pieces of brass that have been fired in "your" gun 3 times. Now if you are doing a wildcat with shoulder blown forward and out, he will make the die a Neck size only to allow you to fire some brass. Send the brass and die back to him and he changes the insert in the die to shoulder bump at no extra charge. Only guy around that does that and his dies are the Rolls Royce of dies for 1K BR shooters but still at reasonable prices. \ Good Luck BH [/QUOTE]
Insert quotes…
Verification
Post reply
Forums
Rifles, Reloading, Optics, Equipment
Rifles, Bullets, Barrels & Ballistics
Run out
Top